How to Set Keyless Entry Remotes
- 1). Put the key in the ignition. Turn the key from the "Off" position to the "On" position eight times within 10 seconds, finishing in the "On" position. When you have done this correctly, the door locks cycle from "Locked" to "Unlocked" to signal that the car has entered "Program" mode.
- 2). Press any button on the keyless entry remote within 20 seconds of completing Step 1. Press the button for every new remote you want to program to this car.
After each remote is programmed, the automatic locks cycle from "Locked" to "Unlocked" to signal that the remote has been programed. You have 20 seconds from when the previous remote was programmed to program each additional remote. - 3). Turn the driver's ignition key from the "On" position to the "Off" position. The locks will cycle from the "Unlocked" position to the "Locked" position, then back to the "Unlocked" position to signal that the car has exited "Program" mode.
Source...