How to Install T-Mold Transitions on Tile Flooring
- 1). Clean out the space between the tile flooring and the other flooring type. Use a vacuum to remove dirt and debris from the space. Measure the space as you will need approximately ¼ inch expansion space on the sides of the bottom portion of the T-mold. If there is not sufficient space you will need to trim the flooring or get another type of transition molding.
- 2). Measure the area where the T-mold transition is to be installed. Mark these measurements on the T-mold transition with a pencil.
- 3). Set the T-mold transition on the miter saw and cut it to size.
- 4). Glue the T-mold transition in place. Spread polyethylene glue on the bottom of the T-mold transition. Press the transition in place over the tile flooring. Let the glue dry for 24 hours before everyday use.
Source...