How to Get Rid of Mold in Shower or Tub
- 1). Dry your bathroom. You will never get the mold problem under control until you get the moisture problem under control. If you do have a window, open it up and turn on some fans. This will draw the moisture outside. If you have an exhaust fan attached to the ceiling, turn it on. This will also draw moisture outward. If you have neither option, try turning on a portable dehumidifier or running your central heating unit until the moisture dries.
- 2). Mix a gallon of water and a cup of bleach. This bleach concentration is highly useful for killing household mold. Despite the heavily dilution, you still must exercise caution when handling bleach, so put on rubber gloves.
- 3). Pour the diluted bleach into a spray bottle. Spray the surface of the tub or shower, wherever mold appears. To give bleach a chance to break down the mold, wait about 15 minutes before proceeding.
- 4). Scrub the surface of the shower or tub with a scrubbing brush. If you have tiles with grout, you can use a toothbrush to reach inside the grout lines. Scrub the entire area firmly to weaken and remove the mold.
- 5). Rinse the entire tub or shower with water to remove the dead mold and send it down the drain. If you have acquired any hard water or mineral deposits on your grout, you can use white vinegar to remove them. If the tub or shower consists of natural stone such as granite or marble, use a pH neutral cleaner instead, as stone surfaces have extreme sensitivity to acids.
- 6). Dry your tub or shower. Once again, you can open a window or turn on an exhaust fan, but you should at least remove some of the moisture by hand to accelerate the drying process. Use towels and remove as much of the water as possible. By removing any buildup of moisture, you can prevent mold from coming back.
Source...