Soft Tonneau Cover Installation Instructions
- 1). Lay the soft tonneau cover over the bed of your pickup truck. Soft tonneau covers typically are domed to the frame around the bed of your truck, with domes placed at regular intervals. Notice where the domes on the soft tonneau cover are located; you'll have to install the other half of each dome so that it lines up with the tonneau cover.
- 2). Remove the adhesive backing on the bottom of one dome and install it in the corner of the truck bed frame, directly under the soft tonneau cover. The two halves of the dome should line up satisfactorily.
- 3). Install another dome on the opposite corner of the bed frame, ensuring the soft tonneau cover is stretched taught between the two domes. You don't want the cover so tight that it eventually rips the domes off, but a loose, flapping cover will create excess noise while you're driving.
- 4). Install domes on the other two corners of the bed frame, continually checking to ensure your soft tonneau cover lines up and fits correctly.
- 5). Install domes along the side and front rails of the truck in their appropriate location. Install domes across the tailgate of your pickup truck.
- 6). Fasten the soft tonneau cover into place and ensure each dome half lines up correctly.
Source...