How to Replace the Dlp BP31-00024A Cooling Fan
- 1). Remove the two screws in the back that secure your computer case, then remove the side of the case.
- 2). Disconnect the four-pin power connector from your Dlp BP31-00024A cooling fan. The four-pin power connector is a small plastic piece with four metal pins inside it. To disconnect the four-pin power connector, simply pull the two plugs apart with your fingers.
- 3). Remove the four screws at the corners of the fan, then remove the fan.
- 4). Place your new fan in the empty slot and replace the screws at the corners of your fan.
- 5). Reconnect the power connector and replace the side of your computer case.
Source...