How to Adjust Andis Trimmers
- 1). Loosen the two screws with the Philips screwdriver located on the back of the blade. Two screws hold the blades together. Do not loosen the screws all the way or take them out.
- 2). Line the blades equally on top on each other but do not overlap the blades. This will allow for the sharpest cut.
- 3). Tighten the screws and look at the blade from a sideways angle to make sure none of the blades is overlapping.
- 4). Hold the blade up to the trimmers with a little pressure. Screw the blade back to the outliner.
Source...