How to Put a 3-piece Slate Pool Table Together
- 1). Flip the frame over on its top. Install the legs one at a time. Screw the legs down with the provided screws. The frame will come out of the box in one piece.
- 2). Flip the table back over on the legs. Install the slate on the frame by screwing it down with a drill and the provided screws. The holes should be predrilled. Line the holes in the slate with the holes in the frame.
- 3). Melt the wax over the screws to fill the hole. Do not overfill the holes. Use the wax to create a smooth surface for the felt to sit on. Use a scrap piece of cardboard off the box to scrape it clean and smooth.
- 4). Lay the felt down over the top of the slate. Slowly staple the felt to the table. Be sure to stretch and smooth out the felt as you go around.
- 5). Attach the rails to the slate table with the provided bolts, using the correct size socket and wrench.
- 6). Attach the pockets at the four corners with a Philips screwdriver and the provided screws.
Source...