Installation Instructions for a Lennox Humidity Control Thermostat
- 1). Find a suitable area to install the thermostat. The best location is on an inside wall in the center of the area that you want to heat or condition. Avoid installing the thermostat on an outside wall where it may be influenced by sunlight or vibrations.
- 2). Place the thermostat approximately 5 feet from the floor and drill 3/16-inch holes with a drill at each screw location.
- 3). Install the thermostat base to the wall and connect it using a Phillips screw driver and screws. Hammer the wall anchors into the hole.
- 4). Thread the wires through the thermostat base. Fill the holes with the mounting screws.
- 5). Connect the wires to the end of the screw terminals to the outdoor unit.
Source...