How to Install a Zagg Side Shield
- 1). Read the instructions, these will show the exact placement of the shield.
- 2). Wash your hands before you begin the installation. Ensure that the area is clean.
- 3). Use a cloth to clean your device and make it free of skin oils.
- 4). Turn off the device.
- 5). Spray your fingertips with the provided sprayer. This will help you to avoid putting fingerprints on the shield.
- 6). Peel the Zagg side shield off its paper backing.
- 7). Hold the Zagg side shield and keep the adhesive side up. Next, lightly spray the front as well as the back sides of the shield with the provided spray.
- 8). Apply the shield to the side of your device, adhesive side down, and gently slide it into place.
- 9). Push the squeegee provided back and forth over the shield to push any excess moisture and bubbles away from the center toward the edges.
- 10
Soak up any excess moisture with a clean cloth. - 11
Use your palm to hold down any loose tabs and flaps until the adhesive dries and they are secure.
Source...