Wind Speeds - Do You Know Your Wind Turbine Speed Requirements?
Do You Know Your Wind Turbine Speed Requirements? There are many different types of windmill models people would be able to use for their home.
However, not all of them would be good for each location since the wind speed varies depending on where you live.
There are many different sites that show what the average wind speeds are for different areas around the United States.
This article is going to review the different types of windmill designs that would be best to utilize in high and low wind locations.
First, to get the best results from the wind, a windmill should be positioned in an area where there is a consistent speed of 12 mph.
If you live in an area that has speeds between 12-20 mph you are in business to drive great performance from your homemade windmill! There needs to be a 7-10 mph wind speed for a horizontal axis windmill before power starts being produced.
So now you can see how important it is to know what your average speed is in your area.
Now as many know the higher you go up in the air the more wind speeds there tends to be.
So what would be a good height to be able to take full effect of the air in your area? First, you need to look at both the horizontal axis and vertical axis windmill to see which model you want to build at your location.
Once you have determined that then you will be able to have a better idea of which windmill design will work for your home.
If you have a vertical axis windmill you can start producing power with as little as 6 mph wind speed.
That is great for a location where the wind speed is minimal.
Horizontal axis windmills need to be places where there aren't any obstructions within 300 feet.
This is difficult for a lot of residence so the other solution would be to have the windmill designed to sit higher up over any barriers.
If the height of the tower is increase by 60-100 feet the cost will increase by 10% but the power will increase by 29%! Now that is a big difference in energy output.
If you are looking on how to make a windmill from your home there are many great sites to use for resources.
The most important fact to know is which model to pick for your home.
If you live in an area where you are surrounded by other homes or structures you might want to go with the vertical axis turbine.
However, if you are located in an open area the horizontal axis turbine would be a great addition for your residence.
However, not all of them would be good for each location since the wind speed varies depending on where you live.
There are many different sites that show what the average wind speeds are for different areas around the United States.
This article is going to review the different types of windmill designs that would be best to utilize in high and low wind locations.
First, to get the best results from the wind, a windmill should be positioned in an area where there is a consistent speed of 12 mph.
If you live in an area that has speeds between 12-20 mph you are in business to drive great performance from your homemade windmill! There needs to be a 7-10 mph wind speed for a horizontal axis windmill before power starts being produced.
So now you can see how important it is to know what your average speed is in your area.
Now as many know the higher you go up in the air the more wind speeds there tends to be.
So what would be a good height to be able to take full effect of the air in your area? First, you need to look at both the horizontal axis and vertical axis windmill to see which model you want to build at your location.
Once you have determined that then you will be able to have a better idea of which windmill design will work for your home.
If you have a vertical axis windmill you can start producing power with as little as 6 mph wind speed.
That is great for a location where the wind speed is minimal.
Horizontal axis windmills need to be places where there aren't any obstructions within 300 feet.
This is difficult for a lot of residence so the other solution would be to have the windmill designed to sit higher up over any barriers.
If the height of the tower is increase by 60-100 feet the cost will increase by 10% but the power will increase by 29%! Now that is a big difference in energy output.
If you are looking on how to make a windmill from your home there are many great sites to use for resources.
The most important fact to know is which model to pick for your home.
If you live in an area where you are surrounded by other homes or structures you might want to go with the vertical axis turbine.
However, if you are located in an open area the horizontal axis turbine would be a great addition for your residence.
Source...