Instructions for the Intex Salt Water Pool Filter
- 1). Unplug the Intex pool pump from the GFCI electrical outlet.
- 2). Remove the skimmer filter screen(s) from inside the pool.
- 3). Insert the rubber stoppers to seal the outlets.
- 4). Connect the pool's skimmer outlet hose to the inlet side of the salt water pool filter.
- 5). Attach the adapter hose from the filter outlet to the pump inlet. Remove the rubber stoppers and replace the screens.
- 6). Plug the pump back into the GFCI outlet.
- 7). Open the relief valve on top of the pump to alleviate air from the system.
- 8). Add to manufacturer's recommended amount of pool salt.
- 9). Turn the unit on and set the salt water pool filter's run time.
- 10
Brush the bottom of the pool to help dissolve the salt. Test all the chemical levels in the pool before swimming.
Source...