Staying Safe When Using a Chain Saw
It's very important to practice the utmost safety precautions when using a chain saw.
The best way to stay safe is to carefully read the entire operator's manual before starting on any task, or by asking someone else who is more experienced with using them if they would be interested in giving a lesson or two.
Protective clothing and equipment, such as safety glasses, steel toed boots, gloves, and close fitting apparel are all a wise idea.
It is especially important that dangerous machinery is not used while under the influence of any kind of medication- prescription or over the counter, nor any alcohol.
Doing so could result in a very costly mistake.
There are three different sizes that chain saws can be purchased in.
Light yard work, such as cutting off smaller branches no more than ten inches in diameter, is easily done with a lightweight saw.
These have a guide bar between eight to twelve inches.
Felling slightly larger trees or cutting logs, no more than eighteen inches in diameter, is best done with a midweight saw.
These have a guide bar between fourteen to twenty inches.
The average consumer should never need to use a heavy weight saw.
These are reserved for professional work, and have a guide bar that is more than twenty inches long in some cases.
In order to get the best performance out of the saw, ensure that it is always properly maintained.
Keeping the teeth sharp will make for quick and safe cutting, as will keeping the engine in proper running order.
To do this, make sure the sparkplug, air filter, and muffler are all working well at all times.
When using the saw, ensure that both hands are used.
Never start it in mid air with only one hand- a stable surface such as the ground should always be used.
This will ensure the maximum control and safety.
A saw that is kept sharp and properly adjusted will never need to be forced through a cut- if this happens, it should be inspected before any further work is done.
When cutting limbs and felling trees, there are several important safety tips to keep in mind.
Always keep legs to the outside of anything being cut, and never stand on anything that is being cut.
One of the best ways to maximize the chain life is to ensure that it stays out of the dirt- this will dull the teeth as well damage other parts of the saw.
And finally, never start working without mentally keeping track of where the chain will go should it break.
The best way to stay safe is to carefully read the entire operator's manual before starting on any task, or by asking someone else who is more experienced with using them if they would be interested in giving a lesson or two.
Protective clothing and equipment, such as safety glasses, steel toed boots, gloves, and close fitting apparel are all a wise idea.
It is especially important that dangerous machinery is not used while under the influence of any kind of medication- prescription or over the counter, nor any alcohol.
Doing so could result in a very costly mistake.
There are three different sizes that chain saws can be purchased in.
Light yard work, such as cutting off smaller branches no more than ten inches in diameter, is easily done with a lightweight saw.
These have a guide bar between eight to twelve inches.
Felling slightly larger trees or cutting logs, no more than eighteen inches in diameter, is best done with a midweight saw.
These have a guide bar between fourteen to twenty inches.
The average consumer should never need to use a heavy weight saw.
These are reserved for professional work, and have a guide bar that is more than twenty inches long in some cases.
In order to get the best performance out of the saw, ensure that it is always properly maintained.
Keeping the teeth sharp will make for quick and safe cutting, as will keeping the engine in proper running order.
To do this, make sure the sparkplug, air filter, and muffler are all working well at all times.
When using the saw, ensure that both hands are used.
Never start it in mid air with only one hand- a stable surface such as the ground should always be used.
This will ensure the maximum control and safety.
A saw that is kept sharp and properly adjusted will never need to be forced through a cut- if this happens, it should be inspected before any further work is done.
When cutting limbs and felling trees, there are several important safety tips to keep in mind.
Always keep legs to the outside of anything being cut, and never stand on anything that is being cut.
One of the best ways to maximize the chain life is to ensure that it stays out of the dirt- this will dull the teeth as well damage other parts of the saw.
And finally, never start working without mentally keeping track of where the chain will go should it break.
Source...