How to Remove Mold From a CPAP Water Container
- 1). Remove the water container from the CPAP machine.
- 2). Fill a sink or basin with a 50-50 ratio of water to vinegar. Add a few drops of mild detergent and swish the solution around until bubbles form on the surface.
- 3). Submerge the water container in the sink and allow to soak for ten minutes. Using a brush, scrub all surfaces of the container, particularly focusing on the spots with mold.
- 4). Drain the sink and rinse the container under running water.
- 5). Place on a towel and allow to air dry before replacing in the machine.
Source...